GF Piping Systems expands Stress Less Pipe Support System
(UC) — GF Piping Systems has expanded the size offerings of its Stress Less Pipe Support System, a system specifically designed for the needs of plastic piping.
Traditional pipe clamps hold piping in a fixed location. If plastic pipes are held in place too tightly without allowance for thermal expansion, mechanical stress is transferred to the pipe. Stress of this kind on plastic pipes is the leading cause of premature piping leaks and failures. When plastic piping leaks, it is most often near clamping locations.
Stress Less pipe supports are specifically designed to eliminate any stress transfer to plastic pipe during thermal expansion. Consisting of a uniquely designed polypropylene insert within a trivalent chrome-coated metal hoop, each Stress Less support leaves room for movement between the inner plastic insert and the pipe. The smooth inner surface of the insert allows the piping to slide freely in the axial direction with minimal stress and wear during each thermal expansion cycle. Meanwhile, the outer metal bracket never comes into contact with the pipe, no matter how tightly it is bolted down at installation.
The unique design of Stress Lessalso protects pipes from damage during seismic activity, since the gap between pipe and support is engineered to prevent severe impact on the pipe when seismic activity occurs. Furthermore, the steel metal hoop can support the weight of piping even during strong seismic events, meeting ANSI/MSS SP-58 requirements for pipe hangers and supports. Relying on decades of engineering experience, GF Piping Systems created Stress Less to protect pipes in a wide variety of conditions, giving users peace of mind.
The Stress Less Pipe Support System includes pipe guides, clevis hangers, and valve supports, allowing installers the flexibility to mount directly on any flat surface, on pipe support rail, horizontally as a hanger, or vertically. With both metric and IPS (inch) sizes, Stress Less® can accommodate most plastic piping systems.
Stress Less guides are available in metric sizes ranging from 20mm to 315mm, including the newly available 125mm, 140mm, 250mm, 280mm, and 315mm sizes. Stress Less guides are also offered in IPS sizes ranging from ½-inch to 12-inch, including the new 5-inch, 10-inch and 12-inch units.
Stress Less is engineered to protect and extend the life of thermoplastic piping systems. The supports can be used with many materials and systems including PVDF, PP, PVC, CPVC, HDPE, ABS, ECTFE, double-contained piping, and pre-insulated plastic piping systems. The hoops are coated with a trivalent gold chromium-coated steel which protects the brackets from rusting, corrosion, and wear, and the plastic inserts are made from a UV resistant polypropylene plastic for added durability. These materials make Stress Less suitable for a wide variety of indoor and outdoor installation settings, from highly corrosive environments to high purity facilities.
Related News
From Archive
- DeLa Express seeks FERC approval for Permian-to-Louisiana gas pipeline project
- OSHA penalizes Houston contractor over safety violations resulting in worker's death
- Fiber infrastructure has no known expiration date, Fiber Broadband Association research concludes
- Nevada OSHA fines Elon Musk's Boring Company over safety violations in Vegas tunnel project
- Damage prevention and safety: Turning awareness into action
- Ditch Witch 1030
- Michigan lawmakers introduce bills to create septic codes throughout the state
- Indiana American Water to gain 8,000 water customers with Silver Creek Water acquisition
- Arkansas governor allocates $42 million for water infrastructure projects
- Federal judge finds Flint, Mich, in contempt over lead water pipe crisis
Comments