Vermeer introduces new trailer vacuum excavator for underground utility work
(UI) – Vermeer has introduced the first model of its next generation of new trailer vacuum excavators, the Vermeer VX75. It is the most powerful Vermeer vacuum excavator in the 75-hp class, equipped with a 1,500-cfm (42.5-m3/min) vacuum blower capable of generating 15 in Hg (381 mm Hg) of suction force. It is available with a 5-in (12.7-cm) hydraulic boom option for standard units and a 4-in (10.2-cm) hydraulic boom option for air and jetter versions.
The VX75 is designed for challenging utility work, including potholing, horizontal directional drilling (HDD) slurry management, and microtrenching dust containment.
“The new VX75 vacuum excavator combines all of the best qualities of the prior McLaughlin and Vac-Tron product lines, as well as many more improvements to create a new generation of Vermeer vacuum excavators,” said T.J. Steele, product manager for Vermeer MV Solutions. “In addition to all of the performance-enhancing features that are sure to get contractors’ attention right away, we also designed this unit to be lightweight, incorporated a CAN bus control system throughout to simplify wiring and improve reliability, delivered operator-friendly controls, and provided more machine operating information.”
The VX75 vacuum excavator's control panel and full-function remote control allow operators to start and stop the machine and control everything from the boom to the water system and spoil tank. This remote control feature is especially useful for contractors using the excavator for slurry management, as they no longer have to manually restart the unit when draining a pit, potentially saving time and fuel.
Powered by a 74.3-hp (56-kW) Kubota diesel engine, the VX75 can be equipped with either a 500-gal (1893.7-L) spoil tank with two 125-gal (473-L) freshwater tanks or an 800-gal (3028-L) spoil tank with two 205-gal (776.5-L) freshwater tanks. It also has an 8-gpm (30.3-L/min), 3,000-psi (206.8 bar) water system, a dual cyclone filtration system, and a full open cam over the spoil tank door.
The VX75 can be configured with a 180-cfm,110-psi (5.1 m3/m, 7.58 bar) air compressor for dry digging and powering pneumatic tools, an 18-gpm at 2,000-psi (68.1 L/min at 138 bar) jetter for cleaning pipes and culverts up to 12 in (30.2 cm) in diameter, and an 8-gpm (30.3-L/min) auxiliary hydraulic system for powering tools such as core saws. Other optional accessories available on the VX75 include a strong arm, an arrow board, a 300,000 BTU hot box, and an external kerosene tank for the hot box.
Related News
From Archive
- Fatal Shawnee trench collapse linked to Oklahoma contractor’s repeated safety violations, OSHA reports
- Construction worker dies after being found unconscious in trench box
- Tunnel boring machine ‘Clack-A-Mole’ nears one-third completion in Oregon outfall project
- Explosion in underground PG&E vault leaves one dead in Richmond, Calif.
- Tennessee pipeline gets initial FERC approval despite environmental concerns
- Wisconsin proposes new PFAS drinking water standards to align with federal rules
- Elgin, Ill., joins EPA drinking water initiative to accelerate lead pipe replacement
- GasTracker Accurately Locates Plastic Gas Pipes
- Florence, S.C., to fund $537 million sewer, water upgrade with bonds and 5% rate hike
- Union County, Ga., breaks ground on $20.5 million fiber broadband expansion project
Comments