March 2011, Vol. 66 No. 3


Slowdown Prompts Omaha Contractor To Explore Geothermal

Growth in ground source heat pump systems hold promise for steady work and additional income. It’s a situation that all too many installation contractors throughout the country have likely experienced firsthand.

The recent economic downturn is the most dramatic this nation has seen since the Great depression. It left the construction industry in peri, and the vast majority of contractors struggling. But Rick Schmitt refused to go down without a fight.

Schmitt founded NEBCON in January 1998, at the height of the fiber explosion and was able to weather that storm as well by making some adjustments, exploring new services and expanding his company’s expertise after the bottom dropped out of the fiber installation market in early 2000s. As a result of his receptiveness to trying new things and a great sense of determination and resilience, NEBCON has enjoyed steady growth over the years and currently has 14 employees. Schmitt is proud of the track record established by NEBCON for putting quality ahead of quantity and taking things one step at a time.

In 2009 — less than a decade after the fiber bust — Schmitt found himself in a similar predicament and facing a similar set of challenges.

“After the economy went haywire, we experienced a downturn in our current market with the types of installations we had been doing in our area, so I started studying about ground source heat pump (GSHP) systems,” Schmitt says. “We looked at several other markets and did a lot of research before settling in on ground source heat pump loop installations or what is commonly referred to as geothermal. There seemed to be a lot going on with it — a lot of momentum — and I felt there was tremendous opportunity and promising potential for growth.”

Schmitt turned to HVAC contractors, ground source heat pump suppliers and equipment manufacturers to gather information about the market. He discovered there were many similarities with ground source heat pump installations and the experience in horizontal directional drilling (HDD) honed by NEBCON during the company’s 13-year history.

“With so many people looking at green technology in the world, a lot of people see it [GSHP] as the right thing to do,” Schmitt says. “The more consumers learn about it, the more receptive they are to making the additional investment in this renewable form of heating and cooling. Ultimately, I think the catalyst that will make this thing explode will be the realization that although the systems may cost more to install initially, over the long haul, they eventually pay for themselves.”

Ground source heat pumps
Ground source heat pumping is a process by which heat is moved into and out of the earth for the purpose of heating and cooling a building or dwelling, as well as providing hot water.

A typical ground source heat pump system features a heat pump, air distribution system (ducts), a hot water system and a series of long plastic pipes (loops) buried underground either vertically or horizontally. The heating and cooling needs of the structure dictate the cumulative amount of loop in the ground. The loops are filled with environmentally safe antifreeze and connected to the heat pump located inside the structure.

During the heating cycle, the system automatically pulls heat from the ground via the fluid in the loops and circulates it through the heat pump, which concentrates the heat and distributes it throughout the structure via duct work. At the same time, the antifreeze continuously cycles back through the loops, where it reheats, and the process repeats itself.

In hot weather when air conditioning is needed, the system reverses itself. Heat is extracted from the structure and is directed to the water heater or back into the ground where it can be stored for reuse during cold-weather months.

Simply put, in the winter months, the ground source heat pump moves heat from the ground into the building. During the summer months, the system moves heat from the building to either the water heater or back into the ground. The system uses renewable energy because the earth becomes a natural sink for storing heat to be used by the geothermal system. It is up to five times more efficient to move heat than it is to create it with a conventional system that uses fossil fuels.

Investing in the right equipment
After completing all the research, educating his staff and getting drill operators proper training and certification, Schmitt turned to Vermeer for help with identifying equipment that would be best suited for the types of ground source heat pump geothermal installations NEBCON intended to pursue. Initially Schmitt felt most confident focusing on residential systems — both horizontal and vertical type installations — and his Vermeer dealer had an answer.

“We’ve used Vermeer equipment for several years and have been very pleased with their dealer and factory support,” Schmitt says. “Our sales rep suggested we try the D20x22FX Series II flex-angle drill, a model that Vermeer developed specifically for installing ground source heat pump systems. The drill has a lot of things going for it that other conventional well drills don’t, like the capability to drill horizontally, vertically, or for that matter, any angle in between. We also saw an opportunity with the flex-angle drill that other equipment doesn’t cover specific to retrofits.”

NEBCON starting installing geothermal systems in the spring of 2010 and currently has logged more than 30 successful projects. We can drill out from a 90-degree angle and then go to a 60-, a 45- or a 30-degree angle without having to reposition the drill. The ability to lessen the footprint is a huge advantage, especially in tight, confined spaces that we often encounter in yards and such when installing residential systems,” says Schmitt.

The International Ground Source Heat Pump Association (IGSHPA) requires that vertical installations have a 15-foot separation between loops. Schmitt explains that to accomplish this using traditional well drilling equipment would require the drill rig to be physically repositioned and moved 15 feet to begin the next bore. But the flex-angle design of the D20x22FX drill allows the operator to keep the drill positioned in relatively close proximity and drill out at different angles to achieve the necessary loop separation.

“We just move the machine a little bit, actually no more than 6 feet, and we can still achieve the 15-foot separation within 20 feet down and then continue drilling out,” Schmitt says. “This is a feature that is very, very useful. The ability to change angles with minimal movement of the drill allows us to install several loops within close proximity of each other and keep our footprint much tighter. We don’t have to tear up nearly as much yard, which is a huge benefit.”

Continuous learning curve
Despite having over 30 installs under their belt, NEBCON continues to hone their ground source heat pump installation skills and learning new techniques is definitely an ongoing process. Among the most interesting has been adjusting to the difference in vertical installations versus horizontal.

“Vertical drilling certainly had a learning curve,” Schmitt says. “You go through different layers of the earth’s crust and that brings a lot of different situations. We learned to adjust many aspects of the drilling process; things such as mud mixings, how to effectively clear cuttings from the hole and adjusting to the many different types of material that could be encountered. Learning to become a good vertical driller will likely be an ongoing process and probably not something that anyone can learn in less than a year.”

With regard to installation specifics and drill plans, Schmitt explains that the HVAC contractors they work with leave it up to NEBCON to handle the details. Among the things Schmitt and his crew must consider in advance of starting a new install are things like the location where the bore will penetrate the house, specifics regarding the location of the loop system, or in the case of a vertical drill, the physical location of the bore, materials and fabrication and actually connecting the system to the heat pump and making it operational.

“For the most part, we try to penetrate the foundation through the floor and come up close to the new geothermal heat pump,” Schmitt says. “This provides for a much cleaner installation. We also choose the loop placement, a decision that requires knowing the intricate details of the existing septic system (if applicable), and any utilities — gas, water, sewer and such — along with consideration for the terrain, including hills, slopes, low lying areas and property lines of course.”

With the site plan completed, Schmitt will then draw up the drill plan, including specifying drill positioning to minimize footprint, drilling angles, tooling most effective in navigating specific and anticipated soil conditions, the type and size of loop material to be installed, estimates the time necessary to complete the installation and any adjustments that may be required along the way.

“As with any new piece of equipment, we had a few bugs to work out initially,” Schmitt says, “but we are very happy with how the drill has performed. The auto rod loader is great because we don’t have to handle every rod like a conventional well driller has to. And the means to go horizontal, vertical or any angle in between eliminates the need for another machine.”

Bright future
Schmitt is delighted with the expansion of company’s services via ground source heat pump installations and remains optimistic about the future.

“Adding ground geothermal systems installations to our menu of offerings has expanded our business and allowed us to provide a greater breadth of services to a whole new market,” he says. “Doing so has helped to flatten the peaks and valleys of our workload and also created a more consistent stream of revenue for us.”

And the future for this renewable form of heating and cooling looks bright. “I think there’s a lot of growth yet to come for ground source heat pumps, especially since we seem to be lagging a bit behind some surrounding states,” Schmitt says. “I suppose there are a lot of contractors that are avoiding geothermal systems loop installations because they are scared of it. We hope to share with them what we’ve learned and possibly open up a lot of avenues for our peers to explore along the way. We plan to get more aggressive with marketing and expect the acceptance and growth to follow.”

NEBCON Inc., 402-926-4757,
Vermeer Corp., (888) 837-6337,

From Archive


{{ error }}
{{ comment.comment.Name }} • {{ comment.timeAgo }}
{{ comment.comment.Text }}