April 2011 Vol. 66 No. 4

New Products

Radiodetection’s Current Direction

Radiodetection’s advanced Current Direction (CD) feature, provided by the RD8000®PDL Multifunction Pipe & Cable Locator and the TX-10 transmitter, enables operators to continue to trace their target utility through today’s increasingly congested underground networks.

Current Direction accessories further increase the feature’s effectiveness making it easier for operators to pick a target line from amongst a group of bunched or parallel utilities.

Current Direction Transmitter Clamp
The CD transmitter clamp is used to induce the CD signal onto the target utility when direct connection isn’t possible, convenient or permitted. Users can also use this clamp to induce low frequency signals onto cables for ‘ordinary’ location work.

Current Direction Stethoscope
Once a CD signal has been applied to a target line, an operator can use the CD Stethoscope to identify it amongst a number of parallel or bunched utilities, simply by applying the stethoscope to each in turn. The stethoscope and the RD8000PDL visually alerts the operator when it is on to the target line.

Current Direction/Current Measurement Clamp
The versatile ‘CD/CM’ clamp provides the targeting capability of the CD stethoscope, but adds further functionality; When clamped around a pipe or cable, the CD/CM clamp will measure the current induced on it by the TX-10 transmitter, displaying the readout on the screen of the RD8000PDL Pipe & Cable Locator, and enabling the operator to identify the cable of interest and also to diagnose spurs or areas of concern on the target cable.

For more information:
www.radiodetection.com/precisionlocate

From Archive

Comments

{{ error }}
{{ comment.comment.Name }} • {{ comment.timeAgo }}
{{ comment.comment.Text }}